M02055x3 15lb Magic Sculpt Epoxy Clay Tan 15 Lb Modeling Compound CN0

Magic Sculp Two-part Epoxy Putty Sculpting and Modeling Compound

• Magic Sculpt two part epoxy putty.
• 15 Lb (7.5 lb resin, 7.5 lb hardener, total of 15 lb)
• Surface may be smoothed out with water. One of the few epoxies that will smooth out with water. Water and soap clean up. Magic Sculpt grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape. Accepts all types of paint.
• Magic Sculp will set at room temperature in about 30 min and completely cure within 24 hours. Magic Sculp will adhere tenaciously to most any surface, and can be sanded and painted when hard.
• Easily mixed, use equal parts of resin and hardener, mix until one solid color. Good adhesion to almost all clean surfaces, including glass. Very forgiving on mixing ratio. Ratio may be varied to slow or speed up time. Indefinite shelf life. Completely inert when cured. Not a toy. Intended for adult collectors, artists, or professional use only. Not suitable for children.